GCI pre-connected optical cables are suitable for high-density application environments in data centers, and can provide 12/24/36/48/72/96/144 core fiber access capacity. The product supports rapid installation and movement. PET nets are used at both ends, which can effectively protect the optical cable and optical fiber connectors from damage during transportation and installation. The matching pull ring can assist on-site installation. Indoor pre-connected optical cables are strictly tested 100% before leaving the factory to ensure that the performance of the product reaches minimum attenuation. According to the on-site installation, there are two situations for pre-connected optical cables:

 

　　 1. Both ends are MPO/MTP connectors (connector types are the same);

 

　　 2. Fan-out optical cable: one end is MPO/MTP head, the other end is LC connector

 

 

 

Features

● MPO/MTP connector adopts 12-port standard push-pull locking;

 

● There are aramid reinforcing elements in the center of the pre-connected optical cable, which has excellent tensile and torsion resistance;

 

● Made of non-deformable IPD circular structure optical fiber;

 

● The outer diameter of the optical cable is significantly reduced, reducing the filling rate of the wire duct and reducing the design requirements for the size;

 

● Both ends of the MPO/MTP jumper are female, and the guide pin is reserved to ensure the matching accuracy of the fiber array

 

● The two ends of the jumper are equipped with pull nets and traction rings, which are suitable for rapid laying on standard pipes and bridges;

 

● Optical cable can choose different fire rating such as OFNR and LSZH

 

Note:

 

1. Without special instructions, GCI provides C-type MPO/MTP jumpers. According to customer requirements, A-type connections and B-type jumpers can be customized;

 

2. C-type MPO-MPO/MTP-MTP jumper, the adjacent pair of core positions cross, the position of the core 1 at one end is 2 at the other end; the position of the core 2 at the other end is 1 at the other end. One end of the flange on both ends faces up, and the other end faces down.

Ordering Information

FCP(X)-(XXX)01-(XXX)(XXX)(XX)-(XXX)M

 

　　1　　2　　　3　　4　　5　　6

 

Position 1 (X) Sheath type: R = OFNR, L = LSZH

 

No. 2 (XXX) Fiber grade: MIG = OM3 grade, MIGP = OM4 grade, SI = OS1 grade, SIG = OS2 grade

 

Position 3 (XXX) Fiber optic connector: MPO = MPO connector, MTP = MTP interface

 

Position 4 (XXX) fiber connector:-= default is the same connector as position 3, LC = LC connector fan-out cable

 

Number 5 (XX) Number of fiber cores: 12 = 12, 24 = 24, 36 = 36, 48 = 48, 72 = 72, 96 = 96, 144 = 144

 

6th (XXX) Optical cable length: 003-999 = 003-999 meters

 

(Note: The outer sheath of the OM3 and OM4 grade 10 Gigabit multimode cable is light green, and the outer jacket of the OS1 and OS2 grade single-mode cable is yellow.)

 

Such as FCPL-SIGP01-MPOLC48-050M, it means 48-core MPO-LC pre-connected fan-out cable, OS2 grade, LSZH sheath, length 50 meters